Meet Tetra®

The now and future of infusion therapy

A Game Changer in
Pump Technology

Simple user interface with On/Off button, Select button, Status indicator light, and audible speaker. A 3-step infusion process, Connect PFS, Insert OPTFlow, Infuse. Get patients up and running with simple training.
No fixed or variable rate control sets, or expensive cassettes required. Reduced ancillary spend and SKU management. Lower residual volume vs mechanical infusers, means less wasted drug for patients and payors.
Five pre-programmed flow rates for specific clinical protocols. Users can select settings to achieve flow rates in IFU tables, providing infusion flexibility and supporting patient adherence.
Validated through extensive duty cycle testing for real-world use per prescribed dosing protocols, delivering reliable performance across the device's lifetime and driving long-term ROI through thousands in avoided ancillary spend. Saves 5–25 minutes of preparation time per session vs traditional mechanical pumps.
Tetra pump held in hands

Ancillary Savings Per Year

Tetra's intuitive design and SKU reduction saves approximately $400 per patient per year. Calculate what that means for your practice.

Calculate Your Annual Savings
Tap to open the calculator
Number of Patients
Patients
Total Annual Savings
$20,000
saved per year, every year
Multiyear savings that compound over time
From SKU reduction
Long-term ROI
Lowest per-infusion costs
Tetra pump close up
Intuitive design supporting ease of use

The smallest pump in its class, designed for versatile use.

Tetra® addresses existing pump pain points with unparalleled innovation designed to support safe, efficient infusions. Five user-selectable pressure levels, with no fixed or variable rate control set or expensive cassettes needed.

Compatible with 5 to 50mL prefilled syringes and EMED OPTFlow needle® sets, with the smallest form factor versus other mechanical and electronic pumps.

Request Information
Optimized for lower per-infusion costs

Simplified Subcutaneous
Delivery.

Eliminates the need for fixed or flow rate tubing connectors and related ancillary costs. The Tetra® Infuser controls the flow rate through programmed pressure settings, thereby reducing cognitive burden associated with extra connections.

Robust Lifecycle
Cleared Per Labeling & 510(k)
5–25 min
Prep Time Saved
5 levels
Selectable Pressure Settings
Tetra PCB circuit board
Built for Patients
Smart & Mighty

The only system that comes with best-in-class needle sets and a reusable needle inserter for subcutaneous infusion.

Features

Built for Patients.
Trusted by Clinicians.

Tetra® eliminates complexity at every step. USB-C charging, no calibration required, and a purpose-built standalone device, nothing to configure. Designed for real life.

  • The smallest pump in its class
  • USB-C connector for simple charging
  • No calibration or biomedical maintenance required for the lifetime of the device
  • Works with 5mL to 50mL Prefilled Syringes
  • No-flow notification for infusion complete or occlusion
  • Lower residual volume vs mechanical and other eletronic infusers
Get In Touch
Tetra Built for Patients
Simplified subcutaneous delivery

Connect. Insert.
Infuse :)*

Simple infusion, every time.

Make your infusions in just a few simple steps.

* Please refer to the Instructions for Use (IFU) for complete instructions.

Small Light Shorter Setup

Saves up to 25 minutes per infusion session thanks to its simpler clinical workflow. The smallest, lightest pump in its class.

Features

Everything Tetra® includes.

The smallest pump in the world for SCIg. Its ophisticated engine helps minimize the form factor. As light as a phone.
Compatible with Hizentra® prefilled syringes in various sizes (5, 10, 20 & 50mL), with adapters for the 5, 10 & 20mL PFS. No custom reservoirs or syringe transfers needed.
Reduced cost per infusion, no flow rate controllers needed. Fewer ancillaries and lower residual volume can save $500 to $700/patient/year. No costly cassettes or flow controller sets.
OPTFlow® Subcutaneous Sets, needle lengths 4, 6, 9, 12, 14mm + Soft-Site Dressing. AccuSert: reusable needle inserter compatible with OPTFlow sets.
Audible no-flow alerts for completed or occluded infusions. No calibration or biomedical maintenance required for the device lifetime. USB-C charging. No programming. Ever.
FP-0010212 . Tetra Micro 50mL
FP-0010213 . Tetra Micro 20mL

Call 916-932-0071  ·  orders@emedtc.com  ·  emedtc.com
[SYRINGE]
Syringe Compatibility
[FLOW]
Reduced Cost
[ACCUSERT]
OPTFlow® & AccuSert
[NOTIFICATION]
No-Flow Notification
[ORDER INFO]
Ordering Information
Side by side

Tetra® vs. the market.
A clear winner.

A clear winner on all fronts vis-à-vis all other major infuser categories.

Tetra®
All Mechanical Pumps
Other Electronic
Dimensions / Weight
2"×2"×2" / 125g
✕
10.20×2.57×2.51 in / 423g (SCIg60)
✕
Up to ~4"×5"×2" / ~600g
Cost
Lowest cost per infusion. No flow rate controllers.
±
Costly flow rate controllers ~$400/yr.
✕
High pump cost. Cassettes $500–$750/yr.
Residual Drug
$200 savings/patient/year.
✕
Hundreds in wasted drug from priming volume.
±
Depending on reservoir.
Usability
Push of a button. Audible occlusion alerts.
✕
Complex ancillary and set up workflows increases errors.
±
Requires Ig transfer. Safety alarms.
Dexterity
Optimal for low dexterity (CIDP).
±
Levers + knobs requiring pulling/turns.
✕
Complex setup and programming.
Hizentra® PFS Compatible
Off-the-shelf PFS: 5, 10, 20, 50mL. No custom reservoirs.
±
Pumps only fit some but not all PFS sizes, adapters or multiple pumps often required.
✕
Only compatible with custom reservoirs.
Portability
Travel size and friendly. Lightest large volume pump in the market.
✕
Limited portability. Bulky. Heavy.
±
Portable. Medium size/weight.
Tetra® key highlights

Excellence in Drug Delivery

Simplification for all stakeholders including patients, caregivers, and specialty pharmacies.

Usability

Simplified experience

Maximizes usability for patients and caregivers. On/Off, Select button, Status indicator light, and audible speaker. Only 1 ancillary line (OPTFlow® set) required per infusion.

3-step process
1. Connect PFS2. Insert OPTFlow3. Begin infusion

A streamlined workflow designed to minimize training burden and support consistent self-administration.

Integrated system

A complete subcutaneous solution

Tetra®, OPTFlow® needle sets, and the AccuSert® reusable needle inserter form a coordinated system designed to support smooth, reliable infusions for PFS 5mL–50mL.

Efficiency
~80%

Reduction in setup steps & time

Mechanical pumps require levers, knobs, and extra connections. Tetra® eliminates these with only 1 SKU line required.

For pharma

Configurable to drug protocol

Designed to comply with drug monographs and region-specific requirements. 5 pre-programmed flow rates support specific clinical protocols.

Drug integrity

Designed for drug integrity

Engineered for careful delivery of biologics like Ig therapies. Lower residual volume reduces drug waste and supports adherence.

Less steps, better experience
Meet Tetra®

Connect with our team to learn how Tetra® can work for your patients or your practice.

Get In Touch